Take Your Network Outdoors
Use your WiFi outside with increased strength & speed!
Get signal to far away cameras or other repeaters like the PiFi.
Super Easy Install
No tech skills required - simply make your cable connections and that's it.
A kit is made up of 3 components.
The outdoor access point includes 2 stock 2.5dBi omni-directional antennas. One port for each frequency, 2.4 GHz & 5 Ghz. With this kit you can choose to boost each frequency with it's own antenna or leave as is.
Omni-Directional (2.4GHz only): Choosing this antenna will create a 360° hot spot. Ideal for getting WiFi access all around your property.
Directional Panel (2.4GHz and 5GHz): Depending on your panel selection a 32°, 90° or 120° signal pattern will extend your network in the direction you point it. Only devices within this radiation cone will see the network. The trade-off is an increase in forward reach.
Directional Grid:(2.4GHz and 5GHz) Single band 2.4GHz, 5GHz & dual band options available. This is the most powerful antenna we offer and it's ideal for sending signal with pinpoint accuracy and far away. This signal pattern is just 3-10° depending on the (dBi) gain.
Outdoor ready and simple to setup! The access point we include in this kit will work right out of the box when plugged into the back of your router through an Ethernet port.
Each kit comes with a 100' Ethernet cable to connect the outdoor device to your router inside. Once connected it will boradcast under it's own SSID which can then be changed to match your home's network.
For the connection between the AP and the antenna, we include the required coaxial cable(s) with 3' of length. These high grade, low loss and American Made cables will come with the correct connectors already installed from our factory in Miami. With our precision crimping machines you'll never have to worry about a bad connector on your equipment.
Any router with Ethernet ports in the back will work with this system. This outdoor WiFi kit will simply use the internet provided by the router with technical setup.
By by default the access point will broadcast under it's factory SSID & name. You can change this yourself by logging into the device (instructions included) or you can have one of our Simple WiFi tech do this for you. Simply choose to have it pre-configured and we'll be in touch before shipping to grab the crendtials you would like.