You have no items in your shopping cart.
In-Line 4 Watt Outdoor Signal Amplifier For all 2.4GHz 802.11b/g Wi-Fi Applications. RF signal amplifier for outdoor (near antenna) installation. Greatly increase effective range of 802.11b and g wireless radio data signals using transmit plus receiver amplification.
The amp is powered via the same coaxial signal cable by using a voltage injector indoors near the computer. The injector is powered by the 7V DC power supply which simply plugs into a household outlet.
This is a high grade high performance amplifier/booster system which provides the absolute maximum range available anywhere. The amp installed at the antenna side provides the utmost in receiver performance.
The Kit includes all brackets and hardware for outdoor mast mounting. Uses all N-type connectors.
Operating Mode Bi-directional, half-duplex Time Division Duplex Senses RF carrier from Transmitter and automatically switches receive to transmit mode.
|Transmit Gain||35dB Max (automatically adjusted)|
|Output Power||4W (4000mW)|
|TX Input Power||4mW(6dBm) minimum, up to 200mW(23dBm) max|
|Receiver Gain||18dB typical|
|Lightening Protection||Direct DC ground at antenna connector|
|DC Surge Protection||at 7 VDC input from transmission cable|
|Power Consumption||500mA at 7V DC 105~240V AC from power supply|
|DC Injector Dimensions||6.3cm x 4.5cm x 2.9cm|
|Booster Dimensions||11.5cm x 6.5cm x 4.5cm|